The correct screwdrivers for your Japanese motorcycle!

Have you ever damaged the screw heads trying to remove those stuck screws on your Japanese motorcycle? If so, then you’ve probably been using a Phillips screwdriver to remove a JIS screw. Every screw on every Japanese designed motorcycle from the 1950’s right up to the newest bikes in the showroom today were manufactured with a unique JIS screw head design we don’t see on products made here in North America. JIS stands for “Japanese Industrial Standard.” If you own a Japanese motorcycle, you need to know about JIS style screwdrivers. People wrongly assume they can use a Phillips screwdriver safely on their Japanese bikes. Not True!

If you look at the screws on many Japanese motorcycles you will find a large number have damaged screw heads. This occurs when you tighten/loosen a JIS screw with a Phillips screwdriver and the screwdriver “cams out” damaging the head. A Phillips screwdriver feels loose or sloppy in a JIS screw. Fortunately, the solution is simple, use a JIS style screwdriver on JIS screws. Gofast Innovations sells a premium quality set of 3 JIS screwdrivers guaranteed to fit the screws on your Japanese bike.

The JIS style screwdriver has a 57 degree point with a flat tip and parallel wings. JIS screwdrivers grip the screw and fit snugly rather than just sitting inside, ensuring a perfect fit every time which greatly increases the probability of removing that screw with no damage.

FEATURES

• The only correct screwdrivers to use on Japanese bikes
• Less likely to strip JIS screws
• Includes three sizes of screwdriver

EACH SET CONTAINS THE FOLLOWING

• 1-JIS style screwdriver-size #1 with a 75mm shaft, perfect for those little screws on handlebar switches, electrics, etc
• 1-JIS style screwdriver-size #2 with a 100mm shaft, our most versatile, great for all carb screws, etc
• 1-JIS style screwdriver-size #3 with a 150mm shaft, fits all those larger screws found on the engine cases and bodywork

Compact Easy to use Motorcycle Jack

At home or on the road, the Tirox Snap Jack is an easy to use, portable and sturdy jack. Get your rear wheel off the ground and make your next chain clean a breeze! The Snap Jack works on most modern bikes, fits under the swingarm and raises the bike 1/2" allowing the wheel to spin freely.

Cable Lubing tool great for extending cable life!

Throttle twitchy? Drum brakes weak? Clutch lever hard to pull? Get this cable lubricator and lube those cables quickly and cleanly. Just clamp the tool over the cable housing and wire, attach the little red straw from a can of cable lube (we use Cable Life brand) and squirt away! Once lube runs out the other end of the cable, you're done. Works for your bicycle's cables too. A tool chest staple.

FEATURES

• Fits standard lube straw
• Extends cable life

 

Flex spout funnels for motorcycles

These simple funnels will help make your oil changes easier. We like a flexible pout for bikes with side reservoir points or hard to reach places. Spouts are removable for easy cleaning and finding that bolt you accidentally dropped in! A great addition to any oil change kit.

SIZING

An Entire Tool Kit in your Pocket!

Function, space, and value converge in this nifty unit! You’ll get 14 tools all in a 9 ounce unit that’s only 3.5” long! This is our best selling tool kit. A must have for every motorcycle owner.

FEATURES

METRIC:

• 3, 4, 5, 6mm hex keys
• Slotted and Phillips screwdrivers
• Socket driver with 8, 10, and 12mm sockets
• 13 & 14mm open-end wrenches
• 3 spoke wrenches
• Grey color
• 3.5" x 1.75" x 1.5"

IMPERIAL:

• 5/32”, 3/16”, 1/4” hex keys
• T25, T2 star keys
• Slotted and Phillips screwdrivers
• Socket driver with 3/8”, 7/16”, and 1/2” sockets
• 10mm box and 9/16” open-end wrenches
• 1 spoke wrench
• Blue color
• 3.5" x 1.75" x 1.5"

Mini Digital Battery Tester

Ever wondered if your motorcycle problems were due to a battery issue? This digital voltage indicator is a great way to check! This tint tool is small enough to fit in your palm but comes packed full of features and ability. A 3 color easy to read LED will let you know the range, and the electronic screen will display the voltage. A SAE Battery lead is required to use this product. 

*If you already own a battery charger or heated vest, the SAE connector from these items is compatible.

Pencil style motorcycle tire pressure gauge!

It doesn't get more simple than this tire pressure gauge but it does its job and does it well. Scale in both kPa and PSI, and reads 0-60 PSI.

FEATURES

• Simple and effective
• Reads both kPa and PSI
• 0-60 PSI

Keep from Losing Important Parts

Keep track of all of those little, easy to lose nuts and bolts with a magnetic parts dish. A super powerful magnetic base keeps parts in the dish instead of behind the work bench. It even works upside down and can stick to your metal frame!

*Dishes may differ slightly from photo

ALL-in-one MOTORCYCLE TOOL KIT

This handy tool kit was developed to cover the most common needs of all bikes in one small pack. Great for traveling or for small jobs, it is the tool kit every rider needs! Plus everything fits into a durable pouch that zips close so you won't lose your most important pieces.

FEATURES

METRIC:

• 10x12mm & 14x17mm open ended wrenches
• 8mm nut driver
• 5/8" & 18mm combo spark plug wrench
• Mini 5-in-1 screwdriver with torx T20,25,27,30 bits
• 3,4,5,6mm hex keys 
• 10-50 psi tire gauge
• 5.5" slip-joint pliers
• 7" x 2" x 2" zip-up pouch in black

EUROPEAN:

• 10x12mm & 13x15mm open ended wrenches
• 8mm nut driver
• 5/8" & 18mm combo spark plug wrench
• Mini 5-in-1 screwdriver with torx T20,25,27,30 bits
• 3,4,5,6mm hex keys
• 10-50 psi tire gauge
• 5.5" slip-joint pliers
• 7" x 2" x 2" zip-up pouch in grey

IMPERIAL:

• 1/2", 9/16", 5/16" open ended wrenches
• 3/8", 7/16", 10mm nut drivers
• 5/8" (16mm) & 13/16" spark plug wrench
• Mini 5-in-1 screwdriver with torx T20,25,27,30 bits
• 1/8", 5/32", 3/16", 1/4", 5/16" hex keys
• 5.5" slip-joint pliers
• 10-50 psi tire gauge
• 5-in1 screwdriver
• 7" x 2" x 2" zip-up pouch in blue

 

This compact kit makes brake bleeds a breeze!

Bleeding your brakes need not be a pain in your derrière. Just pick up a brake bleeder tool and put one end on the bleeder valve and the other in your collection bottle. The clear tubing lets you see the color of the brake fluid, and the one way check valve on the hose allows brake fluid and air to escape, while preventing air from re-entering the system. Super tiny, simple and compact. Get one for your tool box.

FEATURES

• Clear tubing lets you see condition of brake fluid
• One way check valve keeps air out
• Simple design

THE BEST, MOST RELIABLE BATTERY CHARGER

Every motorcycle owner's must have! Battery Tender makes trickle charger with a brain to make sure that your motorcycle batteries last as long as possible. These 12-volt chargers are superior to the competition because they automatically sense low voltage and will keep your battery fully charged without overcharging. You can feel comfortable leaving this charger plugged in all winter, even inside your home. Included are 2 options for connecting to the battery, one with alligator clamps to place directly on the leads and the other with ring ends to affix through the battery bolts. The quick connect SAE piece allows for easy access to charging without having to de-assemble the bike to get to the battery each time. Plus it is compatible with many universal SAE accessories!

JUNIOR 12V 

*This is the most popular battery charger we sell and will work on the majority of batteries

• Output: 12V @ 750mA
• Charger weight: 1 lb
• Size: 3.41” x 1.40” x 2.39”
• Plugs directly into the wall
• Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell)
• Complete 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode)
• Automatically switches to float / maintenance voltage after fully charging the battery and back if voltage drops under load
• Solid state two color LED indicates stage of charger.
• Spark proof
• Short circuit protected
• Reverse hook-up protection
• Includes Alligator Clips and Fused Ring Terminals
• Lead acid safety timer: 80 hrs
• Certification: UL / CSA / BC / FCC
• 5 year warranty

JUNIOR 12V WATERPROOF

*This option is the same as above, but is waterproof and best for bikes kept outdoors

• Output: 12V @ 800mA
• Charger weight: 1.2 lb
• Size: 4.2" x 2.75" x 1.4"
• Plugs directly into the wall
• Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell)
• Complete 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode)
• Automatically switches to float / maintenance voltage after fully charging the battery and back if voltage drops under load
• Solid state two color LED indicates stage of charger
• Working Temperature: -20° to 50°C
• Spark proof
• Short circuit protected
• Reverse hook-up protection
• Includes Alligator Clips and Fused Ring Terminals
• Lead acid safety timer: 80 hrs
• Certification: UL / CSA / BC / FCC
• 5 year warranty

JUNIOR 12V SELECTABLE

*This option will work on both acid filled and lithium ion batteries

• Output: 12V @ 800mA
• Charger weight: 1 lb
• Size: 4” x 2” x 1.37”
• Plugs directly into the wall
• ISM™ micro controller constantly updates charge sequence for smooth transitions between charging steps
• Spark proof
• Short circuit protected
• Reverse hook-up protection
• Selectable for AGM, flooded, GEL, or lithium (LiFePO4) batteries
• Includes Alligator Clips and Fused Ring Terminals
• Lead acid safety timer: 80 hrs
• Lithium safety timer: 18 hrs
• Certification: BC / FCC
• 5 year warranty 

Simple spark plug gap tool!

Properly set your spark plug gap based on your motorcycle manufacturers recommendations. Not all spark plugs have the correct gap out of the box for each application. This tool allows you to dial in your gap!

FEATURES

• Accurately measure spark plug gap
• Makes a nice keychain

Break any motorcycle chain easily with this tool

Remove a stuck Oil Filter with this wrench

Get leverage on a stuck oil filter with this wrench. Makes even hard to reach filters easy to change! Works with any standard 3/8" drive socket wrench.

Not sure what size wrench you need? Contact info@townmoto.com with your make, model and year of vehicle and we will get the answer for you!

Keep your motorcycle's wheels running true with this spoke wrench

If you have spoked wheels, you'll have a loose spoke at some point, and this sweet little tool is small enough to keep in your tool roll and cheap enough to keep on hand. Stepped wrench design fits 6 different sizes of spoke nipples.

Adjust Your motorcycle's Shock Absorbers

Universal spanner wrench for adjusting shock absorbers.

These feeler gauges are a must have for any motorcycle toolkit!

Whether you need to adjust your valves or check your engine clearances, you'll need a set of these feeler gauges to get the job done!

FEATURES

• 20 pieces
• Sizes 0.5mm - 1.0mm

Strap wrench for hard to reach oil filters

Get leverage on a stuck oil filter with this wrench. Makes even hard to reach filters easy to change! Works with any standard 3/8" drive socket wrench.

Boost your dead motorcycle battery in seconds

This lithium ion battery jump starter that can not only jump start your motorcycle, bike, boat or truck (gas engines up to 4.0 litres) it can also charge any phone or electronic device via usb devices and can be used as a powerful flashlight. Built right in is spark proof connections and reverse polarity protection so even the clumsiest and absent minded of us can be the hero getting a dead battery started. The unit can be charged up to 100% in 3 hours. The perfect companion for road trips and charging your phone or other devices while traveling. Not to mention a nice little bit of extra insurance for bikes with electrical issues.

The best way to cut motorcycle grip ends

This grip cutter is great for installing grips on any bike with bar end mirrors, vibration dampeners, or hand guards. Includes both a 7/8" and 1" size stamper and a sturdy 6" extension piece that you hammer though the end of a grip guaranteeing a perfect precision cut every time. We use this tool at the shop constantly for grips purchased in store, and it has yet to go dull!

Internal hex tool for motorcycle axles!

Fits internal hex on many late model sport bike axles, dirt bikes and adventure bikes.

SIZING

• 17 millimeter
• 19 millimeter
• 22 millimeter
• 24 millimeter

We love this speed bleeder from Motion Pro. Makes bleeding your brakes a piece of cake and easier to do on your own. A real nice piece of kit!

FEATURES

• Combines wrench and bleeder valve into one convenient and compact tool
• Available in 8mm, 10mm, and 11mm
• Bleeds brake systems and hydraulic clutch systems
• Internal check valve for fast easy bleeding
• Anodized billet aluminum handle with chromoly steel body
• Compact size for tight spaces
• High quality internal seal
• Multi position handle

SIZING

• Available in 8mm, 10mm, and 11mm

The Must Have tool for Wiring projects!

If you're going to be doing electrical work this tool is a must have! Used to properly crimp open barrel bullet connectors to wire ends. Five size stations mean you can tackle almost all projects involving motorcycles, scooters and ATVs.

 

This 5 piece hook and pick set is a must for anyone working on old bikes. Great for digging out old oil seal, gaskets, o-rings or any other hard to remove bit that you're trying to replace. Bonus: The handle is magnetized for picking up any hard to reach screws, bolts or other small bits of metal you can't reach!

Metric Tool Kit for metric european bikes!

Can also be used on Japanese bikes, however, you may want to use the correct JIS screwdrivers to prevent damage to screw heads.

FEATURES

• 3.25" x 7.25" vinyl carrying case
• Slipjoint Pliers
• 8mm / 10mm wrench
• 10mm / 12mm wrench
• 14mm / 17mm wrench
• 21mm / 24mm sparkplug wrench 
• Handle for sparkplug wrench
• Screwdriver Grip
• #3 Phillips screwdriver bit
• #2 Phillips screwdriver bit

Quick and accurate way to check your motorcycle tire pressure!

Quickly check your motorcycle's tire pressure. Don't head out on a ride with an underinflated tire.

The correct way to remove snap rings and circlips!

These easy to use Snap Ring pliers are the best way to remove circlips and snap rings.

FEATURES

• Economical pliers easily does both inside-and-outside opening snap rings or clips
• Includes three extra sets of tips: one additional straight up and two offset or angle tips

THIS SPARK PLUG WRENCH IS A MUST HAVE FOR ANY MOTORCYCLE TOOLKIT!

This specialized wrench makes quick work of replacing or checking your spark plugs. Whether you're fixing your engine or just doing seasonal maintenance, this tool makes quick work of stubborn, hard to reach, corrosive or rusted on spark plugs.

*Note: Only 10 & 12mm options include Phillips and Flat Screwdriver ends.

4-way Schrader valve tool for removing valve cores!

this 4 way schrader valve tool can be used for removing valve cores, reams the inside of the valve and re-taps the treads.

FEATURES

• Remove valve core
• Re-taps treads
• Reams inside of valve

This tube and tire repair kit a great addition to any motorcycle repair kit.

Save yourself from getting stranded! This repair kit lets you have immediate roadside repair and re-inflation of a punctured tire to keep you moving. This kit works on both tube and tubless tires, and contains every item you wouldn't think of in the situation of a puncture. 

*This product provides a temporary fix, and should not substitute the replacement of a compromised tire.

FEATURES

• 3 x 1 1/4" round patches
• 2 x 2" round patches
• 1 x 1 5/8" x3" oblong patch
• 5 x 4 1/2" reinforced string plugs
• 4 steel canisters containing 16g each of 100% pure high-velocity CO2 gas
• Rubber cement
• Repair tools
• Valve cap
• Replacement core
• Hand cleaner
• Tire valve adapter with brass fittings
• Instructions for use of CO2 inflation system
• Zippered vinyl pouch

SIZING

• 8" x 5" x 11"
• 1lbs 6oz

*This item is an Online Exclusive. Please allow for extra shipping time on this item.

Keep your pipes free of unwanted critters, water, and mud!

Keep your exhaust system clean from mud and water while you wash your bike, or when it's time for winter storage.

FEATURES

• Keeps pipes free of water
• Great for winter storage
• Simple and effective design

Impact driver for removing seized or stripped screws!

Got a stuck screw? Don't round it out, get it out the right way! An impact driver makes life a little easier when dealing with stuck screws. Comes with 6 piece phillips and flat head screwdriver bits.

FEATURES

• Includes 6 phillips and flat head bits
• Durable construction 

Folding Hex and Torx Key Set!

Harley-Davidsons make regular use of hex and star fasteners, so we like this set with the most common sizes (5/32”, 3/16”, 1/4”, 5/16”, T25, T27, T40) in a compact fold-up unit. Allows multiple angles of use, even those hard-to-get-to fasteners shouldn’t pose any problems. If you've got a Harley, this is a good one to keep handy.

FEATURES

• 4 sizes of hex
• 3 sizes of torx
• 5" x 1.5" x 1.25"

The BVP front fork stand allows easy and safe lifting of the front wheel for most repair and maintenance jobs. The extra heavy duty steel construction guarantees long life and durability in all conditions. The BVP front stand is supplied with “under-fork rubber coated” adapters as standard equipment, the stand will not scratch or damage your forks. Allows front brake and wheel cleaning and removal. Stand is supplied with four wheels for stability in all sorts of terrain.

Universal Motorcycle Rear Paddock Stand

The Toxic rear spool type stand allows easy and safe lifting of the rear wheel for most repair and maintenance jobs. Stand is supplied with four wheels for stability and easy of movement. The adjustable swingarm holders allow for a wide range of motorcycles to work with this stand.

A cheap way to get your bike started

Classic jumper cables, have these on hand to get you going the old fashioned way! They are color coded by polarity and the perfect length for motorcycles, ATVs and electric start snowmobiles.  

SIZING

• 6ft
• 10 Gauge
  

Compact Easy to use Motorcycle Jack

At home or on the road, the Tirox Snap Jack is an easy to use, portable and sturdy jack. Get your rear wheel off the ground and make your next chain clean a breeze! The Snap Jack works on most modern bikes, fits under the swingarm and raises the bike 1/2" allowing the wheel to spin freely.

FEATURES

• Measurement range of 0-100 PSI - perfect for any car or motorcycle
• Larger 2 inch high-contrast dial - clearer, more accurate display
• 360 degree swivel chuck - so the dial can be read easily at any angle
• Reinforced rubber hose - no air leakage, built to last
• Free gear-style case boot - protects your gauge from drops and knocks
• Integrated bleed button - for precise tIre deflation adjustments
• Mechanical gauge - performs reliably and accurately for years without batteries
• Holds the reading off the valve, a great convenience for poor light situations

DIAGNOSE YOUR ELECTRICAL GREMLINS

Easily and accurately measure temperature, AC/DC voltage, AC/DC current, batteries, resistance and more using this compact digital multimeter. A great tool to have on hand to test your electrical system including principally voltage (volts), current (amps) and resistance (ohms). Batteries included to to begin using immediately.

Protect your rims!

These tough nylon Rim Savers are a must have when changing motorcycle tires with tire levers. Designed to protect your wheels from scratches and dings caused by tire changing tools, it allows you to put a lot more leverage on the tire without worrying about the consequence on the rim.

SIZING

• Fits most street and off-road rims 
  
• Sold as a pair

Mix bottle for measuring 2-stroke oil

Accurately mix your 2 stroke motor oil before adding to your gas. Measurements are easy to read and include various ratios in ounces and litres. 

SIZING

• 1L

Motorcycle Chain Alignment made easy

This chain alignment tool from Motion Pro makes for quick and accurate chain alignment. The tool works by clamping it squarely to the rear sprocket so the alignment rod will indicate sprocket alignment to chain. We use this tool often in our own garages for old bikes where years of use have taken their toll!

METRIC ALLEN KEY SET FOR YOUR MOTORCYCLE!

9 piece Allen key set with holder.

FEATURES

• Made of chrome-vanadium tool steel
• Sizes included 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10 mm
• Ball end allows for better access to hex socket bolts (up to 25-degree working angle)

This 8 piece Allen Key set is a must have for any metric bike owners toolkit!

8 piece Allen key set with holder.

FEATURES

• Stainless Steel
• Ball end allows for better access to hex socket bolts (up to 30-degree working angle)
• T10
• T15
• T20
• T25
• T27
• T30
• T40
• T45
• T50

THREAD CHASER TO CLEAN UP NASTY 18MM OR 12MM THREADS!

 Great for cleaning up threads. Please check thread pitch required before purchasing.

FEATURES

• Two sizes available M18 x 1.5 or M12 x 1.25
  
• Made in the USA

Thank the tool gods for the Safety Wire Pliers! 

These Safety Wire Pliers make clean, uniform twists every time.

FEATURES

• Cuts and twists safety wire
• Creates a uniform twist

Spark tester to check the condition of the ignition system at each cylinder!

Connects between the spark plug and spark plug wire to troubleshoot dirty spark plug connections, defective points and bad coils or connections.

FEATURES

• Makes troubleshooting simple
• Perfect for tuning carbs on many bikes

7 Piece T-bar socket set!

This T-Bar socket set is a great addition to any tool chest.

FEATURES